Turn off the computer, connect the new mouse to a bus mouse port, and turn on the computer.
NOTE: Install a bus mouse driver if necessary.
NOTE: If your computer has a PS/2 port, you may need to disable the PS/2 port before installing the new mouse.
1) Shutdown Windows 95, and turn off the computer.
2) Connect the new mouse to a bus port on the back of the base unit.
NOTE 1: A bus mouse port is a mini-DIN exactly like a mini keyboard connector.
NOTE 2: Bus mouse ports and PS/2 mouse ports use identical connectors, but are incompatible with one another. Refer to the computer user's manual for proper identification of a mini-DIN connector.
CAUTION: Connecting a bus style mouse to a PS/2 mouse port can damage the motherboard and the mouse.
3) Turn on the computer.
NOTE: Windows 95 may auto-detect and configure the mouse.
4) If the mouse was not auto-detected, install the mouse driver.
NOTE 1: The mouse installation disk may include a program that will 'test' the mouse installation (typically named test.com). Refer to the mouse installation manual for detailed configuration information.
NOTE 2: If the mouse does not work after installing the mouse driver, check for a resource conflict with the bus mouse port.